NBM Media Logo

Banner


Onward Chemicals Introduces FIBREX™ GLUED STEEL FIBERS : An alternate concrete reinforcing material

Onward Chemicals IntroducesFIBREX™ GLUED STEEL FIBERS

Glued Steel Fibers are cold drawn steel fibers, glued together to form bundles and deformed to have hooked ends. They are manufactured by repeated mechanical drawing of low carbon steel wire rods, until the specified thickness is attained. The individual fibers are glued together by means of water soluble glue, to eliminate formation of fiber balls (bunching of fibers) during concrete mixing process.

Fibrex™Glued steel Fibers conform to ASTM A 820 & EN 14889-1: 2006 standards.

Glued Steel Fiber Function & Advantages.

Fibrex™ has high tensile strength, hence the capacity to bear high load and absorb deformation. The hooked ends anchor in to the concrete, enabling the transfer and distribution of stress effectively. Due to its small volume, the steel fibers are fully enveloped by alkaline concrete matrix, rendering it corrosion resistant. Hence corrosion resistance of Glued Steel Fiber is considerably higher than other reinforcing steel.

Onward Chemicals Introduces FIBREX™ GLUED STEEL FIBERS
Fibrex™ Glued steel Fibres concrete absorb and dissipate energy more efficiently than normal concrete without fibers. Hence normal concrete is brittle while concrete with Fibrex ™ is ductile.

High energy is required to pull out Fibrex™ fibers from the concrete matrix, hence the flexural strength is high. The fibers offers post crack ductility- i.e Normal concrete would completely collapse on cracking (Brittle behavior) , while concrete reinforced with Fibrex ™ would continue to bear load even after cracking (Ductile behavior).

Onward Chemicals Introduces FIBREX™ GLUED STEEL FIBERS
Glued Steel fiber concrete offers high impact resistance & performance under dynamic loading. The improvement is due to reduction in stress concentration and better anchoring of fibers to aggregates in the matrix. Improvement in wear ability by 50% & fatigue resistance by 100% (Typical values) are observed in comparison to normal concrete without steel fibers.

Glued Steel Fibers can partly or wholly replace re-bar & mesh in applications, offering cost savings & convenience in construction. Steel fibers can be added in concrete mixer along with other materials during mixing. Hence, these are easy to incorporate unlike mesh and re-bars, which are cumber- some and take time to fix and align. Due to its high reinforcement capacity, reduction in slab thickness to the extent of 20% is possible. This effect in considerable savings on material and time.

Following is the table depicting improvement in Concrete Physical properties using Fibrex™
Characteristics Improvement over Normal Concrete
(without fibers)
Compressive Strength up to 30%
Cracking & Flexural strength 100 to 200%
Fatigue Resistance 100%
Resistance to impact 100 to 300%
Shock absorption 15 times
Abrasion & Corrosion resistance 40 to 50%
Ductility Several times

The fibers impede crack formation and development of hairline cracks in to major cracks by acting as tiny bridges. This not only provides better cosmetic looks but also makes the concrete impervious to water (leaks).

Flexural toughness improves on addition of Fibrex ™. Concrete with Glued Steel Fibers offer improved abrasion resistance, cavitation resistance and erosion resistance, which makes them an ideal choice for dams, canals, ports & bridge decks.

Glued Steel Fibers perform better than locally made loose fibers. These mix well with concrete unlike locally made loose fibers which tend to form fiber balls. Fibrex ™, due to high aspect ratio has better reinforcing capacity than loose fibers, hence lesser quantity is needed in comparison.

Applications: Typical applications include,

Slabs & Flooring: Flooring for warehouses, Factory flooring, Flooring for Commercial buildings, Residential buildings, Porticos, Port hangars, Aircraft hangars, Car parks & Bridge decks.

Precast: Precast architectural & structural elements, Railway sleepers , Septic tanks, Sewer pipes, Cable ducts, Prefab cabins, Housing walls, Rainwater collection units.

Shotcrete: Lining of mines, Tunnels, Canal lining, Slope stabilization on hilly terrains, Repairs of old buildings & structural repairs.

Structures of strategic importance: Safety vaults / strong rooms, Military applications like anti missile hangars & underground shelters, Explosion proof areas, Seismic resistant structures, Nuclear containment shielding & Off shore building projects.

NBMCW February 2012

Click Here
To Know More / Contact the Manufacturer.

Banner

Banner



Currently Online

We have 139 guests online

Alexa Rank

Copyright © 2010 NBM Media Pvt. Ltd. All Rights Reserved.